Pipes:
round, ¾ inch iron pipes, 27mm diameter. Our water pipes come in either a dark raw finish or a light galvanized version – both with an industrial look and natural patina. The pipes receive a clear coat, the
colour comes from the iron itself. Slight colour variants are possible.

The silver pipes are rust free, the dark pipes are not rust free.

Load
capacity: The pipes can carry up to 100kg. Screws & universal plugs are
included. We recommend using plugs specifically for your type of wall to ensure
stability.

The rack
does not need to be drilled into floor.

Useful
tools for assembly: Power drill is needed to attach rack to wall. The plugs are
a size 8. The screws are 4,5mm torx screws, a pipe wrench and a second pair of
hands can help. A hex key for the special fittings is included.

In general, our racks can be mounted to all types of walls, also plaster walls. It is always important to use the right plugs for your wall. The plugs included in orders are universal plugs and are maybe not the best plugs for your wall. We therefore recommend that you find out which plugs would fit your wall best.

Please note, however, that for clothing rails and shelves mounted only to the wall or ceiling the stability is very dependent on the load capacity of the wall. The load capacity varies from wall to wall and has to be analyzed by a handyman on site. For walls with a lighter load capacity, we recommend clothing racks with supports to the floor to take weight off the wall. Examples are our RackBuddy Bob Steele and our Walk-In models.

If you have any other questions, you are always welcome to call us on +44 20 3868 8551 or write an e-mail to info@rackbuddy.com

It is perfectly normal that you can still see the threads of the rack and that it is not entirely screwable into the fittings or end pieces. It is also not possible to screw our pipes to 100% into the threads as we are working with conical threads.

We can sadly not offer you a mounting service for your rack. If you do not want to mount your rack yourself, we recommend contacting a local handyman.

Please be aware, that while we of course aim for perfection, packing mistakes or delivery delays can occur. In this case we will of course figure out a solution together with you as fast as possible, but we do not offer any kind compensation, if this causes a delay/higher costs in the mounting process. Therefore, we suggest waiting to book an appointment with your local handyman till you received all the packages. We can send you a detailed piece list as well, so you can easily check yourself if all parts were included in your order beforehand.

All our clothes racks are made of 3/4 inch pipes, which is approximately 26mm in diameter. We have tested the durability of different sizes of pipes and found that 3/4" is the best size in terms of durability and design.

The concept for our products is to create a raw look. We therefore produce our racks from a material called "black threaded pipe" made of iron. There are no 2 pipes that are alike. This means that the scratches and marks seen on the pipes are part of the design we want to capture. 

The shipping cost starts from €15 and is depending on the weight of your package. The shipping will be calculated in the basket before you check out.

Find more information on the shipment process, shipping & delivery, also for non EU countries, by clicking HERE.

We have two offices in Denmark. One on Frederiksberg Allé 3 in Frederiksberg and one on Gl. vardevej 66A in Esbjerg. It’s possible for you, prior to appointment, to see a selection of our products at those locations.